---

FEATURES RECOMMENDED USES • Accelerates cure of Altex E~Line® 379, E~Line® 239, Carbothane® 130 Clear Coat & Carbothane® 949AZ and AY&B Elite® Pro~Spray Linear Polyurethane finishes • Reduces “dry to handle” time- when time is critical • Reduces time to mask out, and improves masking properties when conditions are marginal Note: Depending on temperature, the addition of Polyurethane Accelerator will reduce the pot life of the treated finish coat - refer to the chart below. CAUTION ! Polyurethane Accelerator should only be used when it is essential to improve cure time. Mixed product should be thinned at least 10% BEFORE adding Polyurethane Accelerator. (excluding Elite Pro~Spray) Over addition of Accelerator may result in drastically reduced Pot Life, and be detrimental to finish gloss level and overall performance. Altex Polyurethane Accelerator, is designed to reduce the time to Hard Cure in winter temperatures in a range of polyurethane finish coats: Use in: Altex Yacht & Boat Elite® Pro~Spray Linear Polyurethane Carbothane® 130 Clear Coat Carbothane®949AZ (Aust. Only) E~Line® 379 E~Line® 239 Typically, Polyurethane Accelerator would be used in: ? A production situation where finished fabrications require to be moved or erected soon after painting has been completed. ? Where masking out areas, (especially in maintenance repaints of pleasure craft), would be significantly delayed. ? To reduce the time to a return to service for various industrial items, commercial floors, earthmoving equipment etc.