---

Carboguard 504
Generic Type Non-inhibitive polyamide epoxy
Description
A high performance, immersion grade (fresh & salt water)
chemically cured epoxy primer. Suitable
for use over suitably prepared mild steel, galvanised steel,
other non-ferrous metals, and most GRP
substrates.
Features
• Excellent primer for water and many aqueous chemicals
immersion service when topcoated with
an approved finish
• Excellent adhesion to difficult substrates
• Excellent holding primer
• Excellent corrosion resistance
• Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types
1, 2 & 3.
• Approved for use in NZ Food Processing Plants (see
"Approvals NZ/AU" section)
• AS4020 Potable Water Approval (see "Approvals NZ/AU"
section)
• Good abrasion resistance
• Very good aged re-coatability
• Resists splash and spillage or fumes of a wide range of
chemicals
• Easy application by brush, roller or spray
• Ideal tie-coat over inorganic zincs
• Versatile - can be used on most substrates under many
different types of topcoat
• Long pot-life
• Excellent maintenance touch-up primer for hand-cleaned
substrates
• A user-friendly primer for epoxy or polyurethane systems
in environments not suited to zinc
primers due to acidic or alkaline fallout or splash & spill.
Colour Standard: Buff
NZ Only: Grey (10 litre kits only)
Gloss Flat
Primer
Self-priming.
May be used as intermediate or tie-coat over zinc rich
primers such as Carbozinc 858 series,
Carbozinc 11, and Altra~Zinc®
605.