---

E~Line® 379 Polyaspartic Acrylic Polyurethane SELECTION & SPECIFICATION DATA Generic Type Polyaspartic acrylic polyurethane Description High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required. Features • Polyaspartic acrylic technology provides exceptional gloss and colour retention • Outstanding cosmetic properties • Outstanding abrasion resistance • Excellent durability due to high flexibility and toughness • Exceptional retention of cosmetic properties due to high UV resistance • Outstanding chemical resistance • Light colours along with a finish coat of Carbothane 130 Clear may be used as an anti-graffiti system due to the excellent solvent resistance - refer also to Altex Graffiti Remover and Easy~Clean SX Additive • High volume solids - Low VOC • Available with Ultra-Fresh Antimicrobial Additive where hygienic germ-free coating systems are required. Colour White, Black, Golden Yellow, and tintable to an extensive range of Resene, RAL, British Standards and AS 2700 colours. Custom (fleet) colours are also available on request Finish Full gloss Primer Refer to Substrates & Surface Preparation. Dry Film Thickness 50 - 75 microns 83 microns wet to obtain 50 microns dry 125 microns wet to obtain 75 microns dry Solids Content By volume 60% ± 1% Theoretical Coverage Rate 12 m²/L at 50 microns 8 m²/L at 75 microns Allow for loss in mixing and application. VOC Values As Supplied : 370 g/L Dry Temp. Resistance 120°C Dry Colour may change as temperature approaches 120°C Limitations The high degree of chemical resistance is a result of dense cross linking in the cured film. This dictates the need for careful observation of recoat times and / or intercoat preparation where multiple coats are applied. Refer to “Dry to Self-Recoat” times. Chemical resistance is also aligned to pigments/colours selected. For optimum performance contact Altex Coatings Technical Services.